爱波彩票APP下载

成品万能支撑器厂家杭州比模特科技爱波彩票APP下载主要经营喷泉景观支撑器,防腐木支撑器,木塑支撑器,水景支撑器等,提供万能支撑器安装与价格报价业务,若大家有万能支撑器、万能支撑架、地板支架或塑木龙骨支架的需要,请联系:0571-86221809

NEWS 新闻中心

NEWS CENTER

  • 石材支撑器在池底的固定方法
  • 本站编辑:浙江创象建筑材料爱波彩票APP下载发布日期:2019-12-12 20:48 浏览次数:

多喷泉景观项目的施工人员在使用石材支撑器架空石材地板的时候,不知道该怎么把支撑器固定在池底。

      安装方法 :

1、石材支撑器高度小于400mm的,可以不用做任何固定。石材支撑器的底基座直径是220mm,直接放置在地面上即可。被架空的每块石材地板都会受到相邻八块地板的相互挤压,无法移动,所以石材支撑器不会倾倒; 

2、石材支撑器高度大于400mm的,用水泥砂浆把石材支撑器底座浇筑在地面上即可。因为喷泉景观的池底基本都有防水层,所以不能打螺钉,打螺钉就会破坏防水层。 

3、如果池底的防水层上面又加了很厚的保护层,可以用螺钉固定。 

The builders of the Multi Fountain Landscape Project did not know how to secure the stone supports to the bottom of the pool while using them to support the stone floors. Installation method: 1, the height of stone support less than 400mm, you can do not do any fixed. The diameter of the base of the stone support is 220mm and can be placed directly on the ground. Each stone floor that is elevated will be squeezed by the eight adjacent floors, and can not be moved, so the stone supports will not be dumped; 2. The height of the stone supports is greater than 400 mm Use Cement mortar to pour the base of stone support device on the ground. Because the fountain landscape of the bottom of the pool is basically waterproof layer, so can not hit the screw, hit the screw will destroy the waterproof layer. 3. If there is a thick layer of protection on the bottom of the pool, screw it in.

Copyright 2018-2020 版权所有:浙江创象建筑材料爱波彩票APP下载 All Right Reserved

湖北快三走势图 湖北快3走势图 湖北快3 湖北快3 湖北快3开奖结果 湖北快3开奖结果 湖北快三遗漏 博旺彩票APP下载 安徽快3开奖结果 百赢彩票APP下载